Here you’ll learn how to switch on/off, choose assistance levels, read the range, use the push assist and reset trips — plus tips on brightness, pairing & updates.

Key essentials

Control unit & display

Power: Short press to switch on; to switch off, hold for a few seconds (system-dependent).
Levels: Use “+”/“–” (Eco/Tour/Sport/Turbo etc.). Lower level = more range.
Info: Toggle between speed, remaining range, battery level, trip, clock.
Lighting: Light button on the display/cockpit (model-dependent).

Tip: Set a favourite level for everyday rides (e.g. “Tour”) and use Turbo only on climbs — this protects the drivetrain (chain & sprockets).

Walk assist

Hold the walk-assist button (activate first if required) → the bike rolls slowly uphill.
Use only while walking beside the bike — never while seated.

Safety & behaviour

Limit operation while riding to the essentials.
In rain: the display is splash-resistant, but do not use a pressure washer.

Trip & range

Reset trip in the display menu “Reset” (often a long press on a button).
Remaining range depends on level, temperature, wind, tyres, weight.

Quick selection: I want to… ⇒ Here’s how

Action

Steps

Note

Switch the display on/off

Press Power briefly; to switch off hold Power 2–3 s (system-dependent).

Check battery level

Change assistance level

Press “+”/“–” → Eco/Tour/Sport/Turbo etc.

Higher level = less range

Use walk assist

Hold the Walk button (activate first if needed) → walk beside the bike.

For walking only

Reset trip

Select Trip in info menu → “Reset”/long press.

Labels may vary

Brightness/night mode

Settings → Display → enable Auto-Brightness/Night.

Kinder on battery/eyes

Pair smartphone (app)

Enable Bluetooth → open the app → choose system → pair & allow permissions.

For navigation/updates

Note: Menu names may differ slightly by display. Look for: Settings, System, Display, Info.

We use these e-systems
follow the links to our partners for more information

Avinox DJI

Bosch

Mahle SmartBike System

Shimano

Troubleshooting & FAQs

Display won’t switch on

Is the battery seated correctly? Check charge level. Hold Power for 5–10 s. Are contacts clean/dry? Otherwise contact your dealer.

Range lower than expected

Use a lower level, check tyre pressure, consider headwind/elevation; temperatures <10 °C reduce range.

App won’t pair

Toggle Bluetooth off/on, check app permissions; if needed “Forget device” and re-pair. Is the display firmware up to date?

Error message appears

Note the code/message, power off/on briefly. If it persists, contact your dealer — ideally with a photo of the message.

Next steps

Choose your display view, try the levels and pair the app for a relaxed start.

Displays & Operation

Any questions left?